ACL 395 Surface Resistivity Meter

Home
Static Testers & Monitors
ACL 395 Surface Resistivity Meter

ACL 395 Surface Resistivity Meter

Price:

$520.00

SKU:

395

Brand:

ACL

Weight:

0.50 LBS

Shipping:

Calculated at checkout

Product Description

The ACL 395 handheld meter features circuitry that produces higher accuracy than other pocket-sized meters. This allows for the same advantages as megohmmeters, but at an economical price. Half decade measurements give a closer indication to actual value. A specially colored “warning” stage alerts the auditor to material approaching the upper end of the dissipative scale, so that it can be designated as nearly out of specification. The 395 meter features conductive rubber rails for the best contact possible. This yields higher accuracy when assessing packaging and assembly lines using the parallel resistivity probe method ASTM D257. When the optional 5-lb probes (part no. 480-694) are used, this meter will comply with IEC 61340-4-1, ANSI/ESDA S4.1 & ANSI/ESDA S7.1 for RTG and RTT testing, making it ideal for auditing in ESD production areas and laboratories.

Product Features

Accuracy: ± 0.25 decade in the dissipative range
TestVoltage: 10 volts at values less than 10⁶
100 volts at values of 10⁶ and greater
Resistivity limits: 10³ - 10¹² ohms per square
Resistance limits (when using external probes): 10³ - 10¹² ohms
LED colors: green 10³ - 10⁶, yellow 3 x 10⁶ - 10⁹, orange 3 x 10⁹ - 10¹⁰, red 10¹ - 10¹²
Conforms to ASTM D257
Includes calibration certificate

Specifications:

Applications:	The ACL 395 meter can be used in all facets of material production including engineering, maintenance, quality control, incoming inspection, manufacturing and research departments for the testing of anti-static mats, floor finishes, paints, wrist straps, smocks, bags and containers.
Certificate of Calibration:	Yes
Display Type:	LED
Includes:	Tester, two cables, 9-volt battery, case, and calibration certificate.
Measuring Range:	Resistivity limits: 10³ - 10¹² ohms per square, Resistance limits (when using external probes): 10³ - 10¹² ohms
Note:	Optional external 5-lb probes to measure resistance in ohms test. When the optional 5-lb probes are used, this audit kit will comply with IEC 61340-4-1, ANSI/ESDA S4.1 & ANSI/ESDA S7.1 for RTG and RTT testing making it ideal for auditing in material production and laboratories.